Stay updated with the latest trends in car care, professional detailing techniques, product guides, and expert advice to achieve the perfect shine.
The deepest shine, effortlessly.
© 2026. All rights reserved. Gloss Pros
Quick links to the products we referenced above.
Washing is the foundation of everything when it comes to protecting the paint on your car. If your wash step is harsh, you can undo the benefits of sealants, ceramic sprays, and coatings much faster than your would otherwise like.
Gloss Pro's Lather is a premium pH-balanced wet-wash soap designed to lift dirt, bugs, and grime while preserving existing protection, leaving a high-gloss, water-sheeting finish—without harsh stripping agents.
pH is a measure of how acidic or alkaline something is. On paper, it sounds simple. That is, until you realize most paint issues aren’t caused by “dirt,” but by what happens between your wash media and the paint when lubrication is poor.
A pH-balanced soap is typically formulated to:
Lather is pH balanced, highly concentrated, and designed to not remove existing protection.
Wash soaps use surfactants that:
Even when paint looks hard, it’s easy to cause micro-marring if:
Lather is exceptionally foamy and silky, which is exactly the feel you want for glide during contact washing.
When a soap rinses well, you’ll often notice sheeting—water forms larger sheets that roll off rather than clinging in a million droplets. Lather was formulated to leave a high-gloss, water-sheeting finish.
If you want to amplify that sheeting and boost hydrophobic performance even further, follow your wash with HYDRO for a fast spray-on, rinse-off silica layer.
Lather is highly concentrated, so dilution matters. Here are the numbers straight from the label:
What you need
Step-by-step
If you feel like you’re “scrubbing,” pause. Increase lubricity (within label range), swap wash media, or pre-rinse more thoroughly.
A strong rinse removes loose grit so your wash media touches less contamination.
Heat + evaporation can cause soap to dry on the panel, especially on darker paint. Keep panels wet and work in sections.
Foam cannons are one of the easiest ways to make your wash safer and more effective.
When you add Lather to a foam cannon, it creates a thick blanket of foam that clings to the paint. That foam helps soften dirt and grime before you ever touch the surface with a wash mitt. Less rubbing = less risk of swirl marks.
Because foam cannons mix water and soap together under pressure, you may need to adjust your bottle mixture slightly depending on your setup. A good rule of thumb is simple:
The goal isn’t just thick foam — it’s slick, wet coverage that loosens grime and rinses cleanly.
Lather is designed as a pH-balanced wash that does not remove existing protection when used as directed.
(Keep in mind: aggressive scrubbing, dirty wash media, or very strong degreasers are usually what cause “my protection is gone” feelings.)
Lather is stated as safe for all exterior surfaces.
Lather is designed to minimize water spots.
Practical tip: rinse and dry quickly, avoid washing hot panels, and don’t let water sit and bake.
